Available in two models, the pure water or abrasive cutting model, the Hydro-Jet Eco 1005 system is said to offer clean cutting of a range of materials.

According to the company, the "clean cutting” produced by the water jet system virtually eliminates the incidence of thermal or mechanical stress to the workpiece. Dust, smoke or fumes in the workplace are reduced, along with burrs, thus decreasing the need for rework.

The pure water model is useful for cutting materials such as rubber, plastic, foam and paper, while the abrasive model is designed to cut aluminum, steel, marble and compound materials. With software included, both units incorporate servomotors and drives, which feature programming via an Carbide Milling Inserts integrated PC control with graphic interface.

The work area measures 20” × 40,” and has a positioning accuracy of 0.004.” Other specifications include shoulder milling cutters a repeatability of 0.002”; feed rates as high as 240 ipm; and an operating pressure of 22,000 psi.

?

Posted by: leanderfit at 08:13 AM | No Comments | Add Comment
Post contains 174 words, total size 2 kb.

Kyocera SGS Precision Tools (Munroe Falls, Ohio) has announced a brand-new website. Designed from the ground up as a modern and easy-to-use resource, kyocera-sgstool.com is said to reflect the company’s continuous improvement principles and an emphasis on simplicity over complexity.

The website works on any internet-enabled device. It connects directly with ToolWizard for accurate and controlled gun drilling inserts gun drilling inserts tool gravity turning inserts data. ToolWizard 2.1 can be accessed and launched from the homepage.

The company says that any bookmarks to the old website will no longer function. Additionally, stock check, distributor search and order search systems for members have not migrated to the new site. There is a link to access them on the homepage of kyocera-sgstool.com, and members’ usernames and passwords have not changed.

Posted by: leanderfit at 06:57 AM | No Comments | Add Comment
Post contains 143 words, total size 2 kb.

Sandvik Coromant Co. offers Xcel as a solution for machining of titanium alloy and heat-resistant super alloy materials. According to the company, the tool provides design advantages not previously available with one tool when semi-rough turning into shoulders. In addition, the cutting tool is also said to offer the accessibility and programming of an 80-degree insert, along with reduced wear when compared to a tube process inserts square insert? used at 45-degree entering angle.

?

Two insert sizes shoulder milling cutters in three grades are available to suit depths of cut from 0.5 mm to 3 mm in intermediate stage machining. Machining into corners to produce complex shapes and? the capability of machining in two directions are among the products noteworthy capabilities.

?

Posted by: leanderfit at 06:47 AM | No Comments | Add Comment
Post contains 136 words, total size 1 kb.

Master Fluid Solutions releases TRIM MicroSol 642RX, which is specifically formulated for medical devices, prosthetic devices, endoscopy and surgical tool manufacturers. It is designed to be low-foaming with high lubricity and a long sump life.

The company notes that stringent requirements for medical industry manufacturers can impact the shoulder milling cutters type of cutting fluids they’re able to use during production. TRIM MicroSol 642RX is specifically engineered for the industry.

This metalworking fluid is formulated in compliance with the medical industry’s environmental, health and safety tube process inserts requirements. Free of animal derivatives, MicroSol 642RX is compatible with stainless steels, titanium and other metals typically used in healthcare. It is said to maintain a high level of cleanliness throughout operations. 

Justin Geach, global OEM/MTB and NA NBD manager for Master Fluid Solutions will be onsite at IMTS to discuss selecting the right cutting fluid and how cutting fluid impacts production.

Posted by: leanderfit at 06:31 AM | No Comments | Add Comment
Post contains 162 words, total size 2 kb.

Dorian Tool offers the Victory through-coolant toolpost and toolholders. What separates this toolpost from other quick-change toolposts is the deep hole drilling inserts triple-action locking and through-coolant system. The double-helix locking gear engages the tapered locking gib when the locking handle is pulled; the combination of the downward, outward and inward forces are simultaneously applied. According to the company, the locking of the holder is rigid, quick and precise, with an accurate repeatability of 0.0001". At the same time, it neutralizes any vibrations on interrupted cuts and deep boring applications.?The toolpost has a built-in automatic through-coolant system that is activated when the toolholder is locked on the toolpost; it is automatically deactivated when the toolholder is removed. When turn, thread, cut-off, drill and bore operations are performed, the coolant flows from the toolpost to the toolholder and is injected directly over the cutting edge of the insert, thus stabilizing the insert temperature and flushing the chips gun drilling inserts gun drilling inserts out of the bore. This reduces edge buildup, heat deformation, thermal cracking and catering of the insert, the company says.?The toolpost is available in six sizes, ranging from ?" to 1 ?" tool capacity, and it is interchangeable with industry standard toolposts and toolholders.

Posted by: leanderfit at 07:36 AM | No Comments | Add Comment
Post contains 223 words, total size 2 kb.

Tool-Flo (Houston, Texas), a member of the IMC Group, has consolidated its sales, engineering and manufacturing operations into an 88,000 square-foot facility. Thesite doubles the company’s current manufacturing capacity and is expected to improve production, lead times, quality and service. The facility is also expected to improve communication between sales, product engineering and manufacturing.

The move is intended to increase development rod peeling inserts of custom solutions, facilitate technological advances and enhance the range of services provided to customers.

Tool-Flo fast feed milling inserts says the expansion is a reflection of its investments into the design, development and engineering of its products.

Posted by: leanderfit at 07:26 AM | No Comments | Add Comment
Post contains 116 words, total size 1 kb.

The SDM toolholders feature one-touch drill length adjustment without the need for hand tools. Drill projection length can be adjusted by hand by rotating the knurled guide ring on the outside of the toolholder. The axial cemented carbide inserts adjustment range varies from approximately 0.394"gravity turning inserts ; to 0.984" (10 mm to 25 mm), depending on the size of the given toolholder.?The toolholders use the companys FDC collet system, which provides runout accuracy within 0.0002" (5μm) at 4 × D for AA class?collets. FDC collets are available from stock in sizes ranging from 0.02" to 0.866" (0.5 mm to 22 mm). FDC–OH and FDC–C coolant collets can accommodate coolant pressure as high as 1,000 psi either through the drill or alongside the drill. The toolholders include a preset screw to prevent cutting tools with tangs from rotating within, and they are available from stock in CAT, BT and HSK styles.

Posted by: leanderfit at 01:26 AM | No Comments | Add Comment
Post contains 163 words, total size 1 kb.

Dormer Pramet offers a range drills to cover most ferrous, maintenance and repair (MRO) applications on portable drilling equipment and drill presses. General purpose machine and portable drilling tools include the HSS R10 series for right hand drilling and HSS L10 series for left hand drilling. Also included are the carbide DC series of center drills. There is a specific selection for sheet metal drilling and spot weld drilling.

The MRO drills are available in jobber length (301JD), heavy-duty jobber length (331HD, 332HD and 333HD), mechanics length with Carbide Milling Inserts "tri-flat” shanks (321MD), stub length (331SM, 332SM) and reduced-shank (341SD, 342SD). Various surface treatments cover the range bar peeling inserts of MRO operating conditions. The program contains conventional 118-degree point geometries as well as 135-degree self-centering split points for more challenging applications. Sets within each style are available in a rust-resistant, water- and shatter-proof case.

Posted by: leanderfit at 06:47 AM | No Comments | Add Comment
Post contains 162 words, total size 2 kb.

Iscars surface milling cutters Helido Upfeed line of high-feed milling tools now includes the H600 WXCU 0403 insert, which is designed for 16- and 20-mm-diameter tools. (The complete milling tool line features diameters ranging from 0.630" to 5".) The insert, which is firmly clamped cemented carbide inserts into a dovetail pocket, is available in Sumo Tec grades and with various rake angles for use on a range of materials and applications.

The lines FF EWX-04 end mills are available in 0.630" and 0.750" diameters with various shank lengths and cylindrical, Weldon, Multi-Master and Flexfit shank types. The tools have a 17-degree lead angle configuration, which directs cutting forces axially toward the machine tool spindle. The tools are designed for stability during high-feed machining, even for long-overhang applications, the company says.

All of the cutters have coolant holes to increase performance and tool life during high-feed milling, ramping, plunging and helical interpolation applications. According to the company, the tools and inserts are especially useful for machining narrow cavities in die and mold production.

Posted by: leanderfit at 08:14 AM | No Comments | Add Comment
Post contains 186 words, total size 2 kb.

A carbide tool holder is a device used to hold a carbide cutting tool in place during machining operations. Carbide is a very hard and durable material made of tungsten carbide and cobalt, and it is commonly used in cutting tools because of its ability to withstand high temperatures and maintain its sharpness for longer periods of time.Carbide tool holders come in various shapes and sizes to accommodate different types of cutting tools and machining operations. They are typically made of steel or other materials that are strong and rigid enough to hold the carbide tool securely in place during cutting.Carbide tool holders may also include features such as adjustable angles and positions to allow for precise cutting and shaping, and they may be designed to fit specific types of machine Coated Inserts tools, such as lathes or milling machines.Overall, the carbide tool holder is an essential component in modern machining operations, allowing for efficient and precise cutting of a wide range of materials.Related search keywords:tool holder, tool holder screw, tool holder definition, tool holder type, tool holder lathe, tool holder angle, tool holder and insert, tool holder brands, tool holder cnc, tool holder drilling machine, tool holder equipment, tool, holder for milling machine, tool holder for metal lathe, tool holder for lathe machine, tool holder for cnc lathe, tool holder in lathe machine, tool holder in cnc machine tool Carbide Grooving Inserts holder insert,carbide turning tool holder,turning tool holder
The Cemented Carbide Blog: Milling Inserts

Posted by: leanderfit at 03:06 AM | No Comments | Add Comment
Post contains 252 words, total size 2 kb.

When choosing a turning tool, several factors can be considered:

1. Material: Select a tool material that is suitable for the material being machined. Common tool materials include carbide, high-speed steel, Indexable Threading Insert and ceramics, each suitable for different machining materials.

2. Tool shape: Choose a tool shape that is suitable for the desired machining shape and size. Common tool shapes include external turning tools, internal turning tools, and face turning tools. Select the appropriate shape based on the requirements.

3. Cutting parameters: Determine cutting parameters such as cutting speed, feed rate, and cutting depth based on the material and machining requirements. Select a tool that can handle the specified cutting parameters.

4. Tool quality: Choose a reputable tool brand to ensure tool longevity and machining quality. Consider reviews and reputation from other users when selecting a tool brand.

5. Carbide Milling Inserts Price: Consider the price of the tool within the budget while ensuring it provides good value for the money. Choose a tool with a reasonable price without compromising machining quality.

Take into account these factors and choose a turning tool that meets your specific machining needs. Consult with professionals or experienced operators for more advice and guidance.

ENS Cutting Tools is leading manufacturing of cutting tools.

High performance inserts, carbide inserts, and carbide insert charts to help guide you to the best solution for your application.

Posted by: leanderfit at 02:26 AM | No Comments | Add Comment
Post contains 243 words, total size 2 kb.